-
-
Basic
- Full
metadata
Identification
Title:
Report: Kingsnorth E.ON UK Carbon Capture & Storage Front End Engineering and Design (FEED) - Chapter 07: Technical Design - Well and Storage
code:
http://data.bgs.ac.uk/id/dataHolding/13606468
Abstract:
During 2010-11, as part of the Carbon Capture & Storage (CCS) Demonstration Competition process, E.ON undertook a Front End Engineering Design (FEED) study for the development of a commercial scale CCS demonstration plant at Kingsnorth in Kent, South East England. The study yielded invaluable knowledge and the resulting material is available for download here. This chapter presents the results of studies into the undersea storage reservoir for CO2, in the Lower Bunter sandstone of the depleted Hewett natural gas field, the design recommendations for new wells and recommendations for abandonment of existing wells. The study addresses the following areas; Storage Reservoir integrity and capacity; Construction and completion of wells; CO2 properties and injectivity; Abandonment of existing and new wells; Monitoring; Hazard Identification (HAZID) and Risk Assessment. Some of the key aspects of the Wells and Storage technical design are; Wells that have already been abandoned using conventional methods pose a risk of future leakage to the surface and thereby compromising the integrity of the CO2 store; Data acquisition can be difficult: ensure that all required data sets are identified and make requests as early as possible to ensure quality data is obtained resistant standards; The CO2 equation of state and phase diagram is paramount in designing the injection process. Temperature and pressure of the CO2 must be carefully specified to avoid uncontrolled condensation or vaporisation; Many standard components and materials used in the offshore industry are suitable for use in CO2 flowing regime injection applications. Particular attention must be paid to corrosion resistance and longevity in a CO2 environment; For drilling injection wells into a depleted hydrocarbon reservoir, the principal challenge is drilling into low pore pressures, whilst minimising formation damage. Further supporting documents for Chapter 7 of the Key Knowledge Reference Book can be downloaded. Note this dataset is a duplicate of the reports held at the National Archive which can be found at the following link - http://webarchive.nationalarchives.gov.uk/20121217150421/http://decc.gov.uk/en/content/cms/emissions/ccs/ukccscomm_prog/feed/e_on_feed_/storage/storage.aspx
Individual Name:
Department of Energy & Climate Change (DECC)
Organisation Name:
Department of Energy & Climate Change (DECC)
Organisation Name:
E.ON UK
Organisation Name:
E.ON UK
role:
principalInvestigator
Individual Name:
Enquiries
Organisation Name:
British Geological Survey
Delivery Point:
The Lyell Centre, Research Avenue South
administrative Area:
LOTHIAN
e-mail:
enquiries@bgs.ac.uk
Individual Name:
Enquiries
Organisation Name:
British Geological Survey
Delivery Point:
The Lyell Centre, Research Avenue South
administrative Area:
LOTHIAN
e-mail:
enquiries@bgs.ac.uk
MD_MaintenanceInformation:
maint. / update frequency:
notApplicable
File Name:
https://resources.bgs.ac.uk/images/geonetworkThumbs/0f3871e4-df96-1952-e054-002128a47908.png
keyword:
http://www.eionet.europa.eu/gemet/concept?cp=13&langcode=en&ns=5
Title:
GEMET - INSPIRE themes, version 1.0
keyword:
NGDC Deposited Data
Title:
BGS Thesaurus of Geosciences
keyword:
NGDC Deposited Data
keyword:
https://webapps.bgs.ac.uk/services/ngdc/accessions/index.html
keyword:
https://ukccs-research.org/
Access Constraints:
otherRestrictions
Other Constraints:
intellectualPropertyRights
Other Constraints:
Either : (i) the dataset has not been formally approved by BGS for access and use by external clients under license; and / or (ii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted before the dataset can be provided to, or accessed by, BGS staff or external clients. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant access restrictions. This staff member should revert to the IPR Section (IPR@bgs.ac.uk) for advice, should the position not be clear.
Other Constraints:
http://inspire.ec.europa.eu/metadata-codelist/LimitationsOnPublicAccess/INSPIRE_Directive_Article13_1e
Use Constraints:
otherRestrictions
Other Constraints:
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
Other Constraints:
Either: (i) the dataset is made freely available, e.g. via the Internet, for a restricted category of use (e.g. educational use only); or (ii) the dataset has not been formally approved by BGS for access and use by external clients under licence, but its use may be permitted under alternative formal arrangements; or (iii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted in order to determine the permitted usage of the dataset. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant use restrictions. This staff member should revert to the IPR Section (ipr@bgs.ac.uk) for advice, should the position not be clear.
topicCategory:
geoscientificInformation
Supplemental Information:
http://webarchive.nationalarchives.gov.uk/20121217150421/http:/decc.gov.uk/en/content/cms/emissions/ccs/ukccscomm_prog/feed/feed.aspx
Distribution
Individual Name:
Enquiries
Organisation Name:
British Geological Survey
Delivery Point:
The Lyell Centre, Research Avenue South
administrative Area:
LOTHIAN
e-mail:
enquiries@bgs.ac.uk
Digital Transfer Options:
linkage:
http://www.bgs.ac.uk/ukccs/accessions/index.html#item37244
Data Quality
level:
nonGeographicDataset
other:
non geographic dataset
Title:
INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology
explanation:
See the referenced specification
Title:
Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
explanation:
See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF
statement:
These reports are the result of a Front End Engineering and Design (FEED) study undertaken by E.ON following the award of a FEED contract with the Department of Energy and Climate Change (DECC) in March 2010.
Metadata
File Identifier:
0f3871e4-df96-1952-e054-002128a47908
Resource type:
nonGeographicDataset
Hierarchy Level Name:
non geographic dataset
Organisation Name:
British Geological Survey
Delivery Point:
The Lyell Centre, Research Avenue South
administrative Area:
LOTHIAN
e-mail:
enquiries@bgs.ac.uk
Metadata Standard Name:
http://vocab.nerc.ac.uk/collection/M25/current/GEMINI/
Metadata Standard Name:
UK GEMINI
Metadata Standard Version:
2.3
Dataset URI:
http://data.bgs.ac.uk/id/dataHolding/13606468