-
-
Basic
- Full
metadata
Identification
Title:
Hydrostatic compressive tests on carbonates samples from Apulian Carbonate Platform at Pontrelli Quarry, Italy
code:
http://data.bgs.ac.uk/id/dataHolding/13608109
Abstract:
This dataset contains experimental hydrostatic testing data with ultrasonic surveys and acoustic emission data as outlined in "Panza, E., Agosta, F., Rustichelli, A., Vinciguerra, S. C., Ougier-Simonin, A., Dobbs, M., & Prosser, G. (2019). Meso-to-microscale fracture porosity in tight limestones, results of an integrated field and laboratory study. Marine and Petroleum Geology, 103, 581-595, https://doi.org/10.1016/j.marpetgeo.2019.01.043". The data is provided in a .zip folder containing 11 files, with 10 files for each mechanical tests and 1 containing all the geophysical data recorded and calculated; accompanied by a README file for introduction. Files format is Microsoft Excel Worksheet (.xlsx) and data are tabulated. Each file contains the corresponding relevant sample’s details, and each column of data is clearly labelled, units included. For each experiment, mechanical dataset recorded time, axial force, axial displacement, axial stress, confining displacement, confining pressure, axial strains A and B, circumferential extensometer, and internal temperature. Physical dataset recorded sample’s dimensions, density, compressional (P) wave arrival time and shear (S1, S2) wave arrival times; details of calculated velocities and elastic parameters are also given. Ten right cylindrical samples of limestone from the Altamura Formation sampled at Pontrelli Quarry were tested in hydrostatic compression at a range of confining pressures (Pc = σ1=σ2=σ3) from 0 to 50, or 80 MPa, at 2 MPa/min. Samples were cored either horizontal (H) or vertical (V) that is respectively sub-parallel and sub-orthogonal to bedding; the orientation is indicated in the sample’s ID. Ultrasonic velocity measurements were performed at Pc = 0, 1, 2.5, 5, 10 MPa, and then at steps of 10 MPa up to the maximum Pc value. Each sample was tested oven dried (ca. 12 hours at 40 °C followed by cooling in a desiccator for 1 hour; all prior to the hydrostatic compression). All tests were conducted at room temperature. The experiments were conducted by Dr E. Panza, M. Dobbs and Dr A. Ougier-Simonin using the MTS815 Rock Testing System in triaxial configuration in the Rock Mechanics and Physics Laboratory of the British Geological Survey. All responsible for the collection and initial interpretation of the data.
Individual Name:
Eliza Panza
Organisation Name:
Università degli Studi della Basilicata
Individual Name:
Fabrizio Agosta
Organisation Name:
Università degli Studi della Basilicata
Individual Name:
Enquiries
Organisation Name:
British Geological Survey
Delivery Point:
Environmental Science Centre, Nicker Hill, Keyworth
administrative Area:
NOTTINGHAMSHIRE
e-mail:
enquiries@bgs.ac.uk
Individual Name:
Enquiries
Organisation Name:
British Geological Survey
Delivery Point:
Environmental Science Centre, Nicker Hill, Keyworth
administrative Area:
NOTTINGHAMSHIRE
e-mail:
enquiries@bgs.ac.uk
Individual Name:
Enquiries
Organisation Name:
British Geological Survey
Individual Name:
Enquiries
Organisation Name:
British Geological Survey
MD_MaintenanceInformation:
maint. / update frequency:
notApplicable
File Name:
https://resources.bgs.ac.uk/images/geonetworkThumbs/05f1bed2-1aba-5ced-e063-0937940afe80.png
keyword:
http://www.eionet.europa.eu/gemet/concept?cp=13&langcode=en&ns=5
Title:
GEMET - INSPIRE themes, version 1.0
keyword:
Fracture properties
keyword:
NGDC Deposited Data
keyword:
Acoustic properties
keyword:
Compression tests
keyword:
Acoustic emission
keyword:
Deformation (materials)
keyword:
Sedimentary rocks
Title:
BGS Thesaurus of Geosciences
keyword:
https://webapps.bgs.ac.uk/services/ngdc/accessions/index.html
keyword:
NGDC Deposited Data
Access Constraints:
otherRestrictions
Other Constraints:
licenceOGL
Other Constraints:
http://inspire.ec.europa.eu/metadata-codelist/LimitationsOnPublicAccess/noLimitations
Other Constraints:
Available under the Open Government Licence subject to the following acknowledgement accompanying the reproduced NERC materials "Contains NERC materials ©NERC [year]"
Use Constraints:
otherRestrictions
Other Constraints:
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
Other Constraints:
Available under the Open Government Licence subject to the following acknowledgement accompanying the reproduced NERC materials "Contains NERC materials ©NERC [year]"
topicCategory:
geoscientificInformation
Distribution
Individual Name:
Enquiries
Organisation Name:
British Geological Survey
Delivery Point:
Environmental Science Centre, Nicker Hill, Keyworth
administrative Area:
NOTTINGHAMSHIRE
e-mail:
enquiries@bgs.ac.uk
Individual Name:
Enquiries
Organisation Name:
British Geological Survey
Digital Transfer Options:
linkage:
https://webapps.bgs.ac.uk/services/ngdc/accessions/index.html#item182318
Digital Transfer Options:
linkage:
https://doi.org/10.5285/b1f5675b-d6c5-4751-8570-4a3d88a02ec8
name:
Digital Object Identifier (DOI)
Data Quality
level:
nonGeographicDataset
other:
non geographic dataset
Title:
INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology
explanation:
See the referenced specification
Title:
Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
explanation:
See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF
statement:
Ten right cylindrical samples of limestone from the Altamura Formation sampled at Pontrelli Quarry were tested in hydrostatic compression at a range of confining pressures (Pc = σ1=σ2=σ3) from 0 to 50, or 80 MPa, at 2 MPa/min. Samples were cored either horizontal (H) or vertical (V) that is respectively sub-parallel and sub-orthogonal to bedding; the orientation is indicated in the sample’s ID. Ultrasonic velocity measurements were performed at Pc = 0, 1, 2.5, 5, 10 MPa, and then at steps of 10 MPa up to the maximum Pc value. Each sample was tested oven dried (ca. 12 hours at 40 °C followed by cooling in a desiccator for 1 hour; all prior to the hydrostatic compression). All tests were conducted at room temperature. The experiments were conducted by Dr E. Panza, M. Dobbs and Dr A. Ougier-Simonin using the MTS815 Rock Testing System in triaxial configuration in the Rock Mechanics and Physics Laboratory of the British Geological Survey. All responsible for the collection and initial interpretation of the data. The mechanical datasets presented are the logging files as created between the 09th and 17th of March 2015 with initial interpretations from Drs A Ougier-Simonin and E. Panza. The geophysical dataset presented tabulates the compiled data from copying-pasting the processed arrival times of each ultrasonic velocity surveys done on Samos AEWin software during the corresponding mechanical testing. Mechanical and geophysical datasets can be used together and data compared based on the time and confining pressure information provided.
Metadata
File Identifier:
05f1bed2-1aba-5ced-e063-0937940afe80
Resource type:
nonGeographicDataset
Hierarchy Level Name:
non geographic dataset
Organisation Name:
British Geological Survey
Delivery Point:
Environmental Science Centre, Keyworth
administrative Area:
NOTTINGHAMSHIRE
e-mail:
enquiries@bgs.ac.uk
Metadata Standard Name:
http://vocab.nerc.ac.uk/collection/M25/current/GEMINI/
Metadata Standard Name:
UK GEMINI
Metadata Standard Version:
2.3
Dataset URI:
http://data.bgs.ac.uk/id/dataHolding/13608109