UKCCSRC 2020: Electrical Capacitance Tomography and Temperature profiles data for the experiment of CO2 frost formation during cryogenic carbon capture with tomography analysis at The University of Chester 2020
A dataset is presented for defining real-time CO2 frost formation in a vertical packed column. ECT could estimate the internal permittivity distribution of the sensing area through boundary measurements. The ECT system used in this work includes sensors, data acquisition system and a computer with imaging software. The excitation signal is a sine wave with 14 Vp-p and 200k Hz frequency. One measurement electrode is chosen for excitation; other electrodes are used to acquire the signal separately. The frame rate of the ECT system is 714 frames per second. The temperature of the bed material is recorded using thermocouples and data loggers, the thermocouples are inserted into the capture column from the top of the column and are adjusted to an appropriate height above the horizontal mixed gas injector. Using the thermocouples above and below the ECT sensor helped to estimate when frost formation would be occurring within the region of bed material that the ECT sensor was measuring. The presence of this plateau in the temperature profiles identifies that CO2 frost is forming within the bed and has reached an equilibrium. We include data of ECT capacitance and temperature during the whole progress. It was found that the temperature, packing material and component of mixer gas all effect the ECT measurement. This dataset could be used to withstand extreme low temperature conditions or in desublimation processes, and its potential application to decarbonise the marine transport is significant to avoid costs if using new infrastructure for ammonia or hydrogen manufacture. Our results indicate that ECT has potential to be a novel technique for monitoring dynamic CO2 frost formation during cryogenic carbon capture. The associated report is included in the data too. Accompanying paper: Preliminary study of CO2 frost formation during cryogenic carbon capture using tomography analysis - ScienceDirect, https://doi.org/10.1016/j.fuel.2022.125271.
non geographic dataset
:
http://data.bgs.ac.uk/id/dataHolding/13607717
English
Geoscientific information
GEMET - INSPIRE themes, version 1.0:
BGS Thesaurus of Geosciences:
Cryogenics
Tomography
NGDC Deposited Data
Carbon dioxide
Carbon capture and storage
UKCCS
Free:
Free:
NERC_DDC
creation: 2021-02-18
2020-10-28
-
2020-12-11
University of Edinburgh
Yuan Chen
Sanderson Building, Robert Stevenson Road, The King's Buildings,
Edinburgh,
EH9 3FB
email:
not available
Role: originator
British Geological Survey
Enquiries
email:
not available
Role: distributor
British Geological Survey
Enquiries
email:
not available
Role: point of contact
Data Quality
The experimental procedure begins with an empty air-filled pipe ECT reference calibration measurement to check if all electrodes work normally. The ECT measurement procedure begins when a cold ceramic-filled pipe ECT reference calibration measurement was taken for the ceramic packing with low permittivity material Cl(j). The capture stage started by feeding a mixture of CO2 and nitrogen through the mixed gas injector. When CO2 starts defrosting, a second ECT measurement is made to determine ceramic packing with high permittivity material Ch(j). Finally, after these two-calibration references are taken, the ECT is connected to a computer where visualization of the real-time images can be accessed on the computer screen, to determine whether the ECT sensor is able to detect frost formation.
INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology
Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
Constraints
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
Available under the Open Government Licence subject to the following acknowledgement accompanying the reproduced NERC materials "Contains NERC materials ©NERC [year]"
licenceOGL
Metadata about metadata
bc8bf8d4-a260-184f-e054-002128a47908
British Geological Survey
The Lyell Centre, Research Avenue South,
EDINBURGH,
EH14 4AP,
United Kingdom
tel: +44 131 667 1000
email:
enquiries@bgs.ac.uk
Role: point of contact
2024-04-24