BGS GeoSure Shrink Swell 3D for London and Thames Valley

The BGS GeoSure Shrink Swell 3D data is a regional hazard susceptibility map that identifies areas of potential shrink–swell hazard, in three dimensional space, at intervals down to 20m in the London and Thames Valley area. Shrinking and swelling clays can change volume due to variation in moisture, which can cause ground movement that may affect many foundations. The data provides an indication of variation in Volume Change Potential (VCP) of shrink-swell clays and is classified on an A-E (low to high) range of hazard susceptibility. BGS GeoSure Shrink Swell 3D for London is part of the BGS GeoSure range of natural subsidence products. It is derived from the BGS Geology 50k data, the BGS London Lithoframe 3D model and the GeoSure v7 Shrink-Swell layer.
Nenalezeno https://resources.bgs.ac.uk/images/geonetworkThumbs/4930ac62-0d72-1269-e054-002128a47908.png
dataset
: http://data.bgs.ac.uk/id/dataHolding/13607109
English
Geoscientific information
GEMET - INSPIRE themes, version 1.0: BGS Thesaurus of Geosciences:
data.gov.uk (non-INSPIRE)
Geohazards
Three dimensional models
Free:
NERC_DDC
-1.2822, 51.3364, 0.4588, 51.6725
Greater London Authority [id=41441]
creation: 2017-01
unknown - before
vector
British Geological Survey
Enquiries
Environmental Science Centre, Nicker Hill, Keyworth, NOTTINGHAM, NG12 5GG, United Kingdom
tel: 0115 936 3143
email: enquiries@bgs.ac.uk
Role: distributor
British Geological Survey
Enquiries
Environmental Science Centre, Nicker Hill, Keyworth, NOTTINGHAM, NG12 5GG, United Kingdom
tel: 0115 936 3143
email: enquiries@bgs.ac.uk
Role: point of contact

Data Quality

The dataset was derived from the London Lithoframe 3D model. Depths to each of the formations used in the model were extracted across the model extent at a resolution of 50x50m. This data was then further processed to produce an attributed feature class showing which formation was present at specific depths. The depths used are 0, 1, 2, 3, 4, 5, 10, 15 and 20m. Each of the formations was given a VCP value and VCP range. A further processing stage ensured consistency with the DIGMAP 50k surface geology.
INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology
Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services

Constraints

The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
The dataset is made available to external clients under BGS Digital Data Licence terms and conditions. Revert to the IPR Section (iprdigital@bgs.ac.uk) if further advice is required with regard to permitted usage.

Metadata about metadata

4930ac62-0d72-1269-e054-002128a47908
British Geological Survey
Environmental Science Centre,Keyworth, NOTTINGHAM, NG12 5GG, United Kingdom
tel: +44 115 936 3100
email: enquiries@bgs.ac.uk
Role: point of contact
2024-04-24

Coupled Resource