UKCCSRC Call 1 project report: Chemical looping for low cost oxygen production and other applications. Part II (restricted)

Imperial College has modelled and designed from first principles a counter-flow thermal oxygen reactor using CuO (MnO) based particles as an oxygen carrier, for replacing the burner in conventional coal fire power plant. The length of the reactor depends on the required falling distance for CuO particles to heat up and complete the decomposition. Initial calculations indicated that this was higher than hoped (500 mm). The design is being optimised. A prototype burner has been built and tested according to the design. After intense tests and some modifications on the prototype, we managed to show some encouraging results as a proof of concept. It is demonstrated that under the current design, there is strong evidence that the particles exhibited sufficiently fast kinetics to release the required oxygen to support complete combustion of propane fuel in an initially sub-stoichiometric flame. The results have led to the construction of a second version of the burner, with improved designed, and a more powerful surface mixed burner capable of much higher heat duty than the current one. The new version of the burner will be tested during the next few months. Part II of the report is restricted and not available for download.
Nenalezeno https://resources.bgs.ac.uk/images/geonetworkThumbs/2c852ebe-d669-3dbc-e054-002128a47908.png
non geographic dataset
: http://data.bgs.ac.uk/id/dataHolding/13606876
English
Geoscientific information
GEMET - INSPIRE themes, version 1.0: BGS Thesaurus of Geosciences:
NGDC Deposited Data
UKCCS
Free:
NERC_DDC
creation: 2013-05
after - before
Imperial College London
Paul Fennell
, United Kingdom
email: not available
Role: point of contact
Imperial College London
Paul Fennell
, United Kingdom
email: not available
Role: principal investigator
Imperial College London
Zili Zhang
, United Kingdom
email: not available
Role: point of contact

Data Quality

UKCCSRC Call 1 project, grant number: UKCCSRC-C1-39, Lead institution: Imperial College London
INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology
Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services

Constraints

The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
Either: (i) the dataset is made freely available, e.g. via the Internet, for a restricted category of use (e.g. educational use only); or (ii) the dataset has not been formally approved by BGS for access and use by external clients under licence, but its use may be permitted under alternative formal arrangements; or (iii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted in order to determine the permitted usage of the dataset. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant use restrictions. This staff member should revert to the IPR Section (ipr@bgs.ac.uk) for advice, should the position not be clear.
Either: (i) the dataset is made freely available, e.g. via the Internet, for a restricted category of use (e.g. educational use only); or (ii) the dataset has not been formally approved by BGS for access and use by external clients under licence, but its use may be permitted under alternative formal arrangements; or (iii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted in order to determine the permitted usage of the dataset. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant use restrictions. This staff member should revert to the IPR Section (ipr@bgs.ac.uk) for advice, should the position not be clear.

Metadata about metadata

2c852ebe-d669-3dbc-e054-002128a47908
British Geological Survey
The Lyell Centre, Research Avenue South, EDINBURGH, EH14 4AP, United Kingdom
tel: +44 131 667 1000
email: enquiries@bgs.ac.uk
Role: point of contact
2024-04-24

Coupled Resource